Filter
Top Products
CHAPTER 5: SPECIFICATIONS
32
Output Specifications
Nominal Output Voltage 200, 208, 220, 230, 240 Vac; 50 or 60 Hz, 1 phase, 3 wire
Output Power kVA 4 – 16 kVA
Output Power kW 2.8 – 11.2 kW
Load Power Factor 0 – 1
Output Frequency 60 or 50 Hz nominal
Output Voltage Regulation
Steady State
< ± 3% for no load to full load, min ac input to max ac, min dc to max dc,
linear or non-linear load or any combination
Output Voltage Regulation
Transient/Dynamic
< ± 5% for 100% load application or removal, linear or non-linear load
Recovery Time < 10 milliseconds (i.e. half cycle to steady state)
Total Harmonic Distortion < 2% for linear loads; < 5% for non-linear loads.
Load Crest Factor Supported < 5% for 100% non-linear loads up to 5:1
Overload Capacity 130% for 10 minutes. With N+1
Efficiency Approximately 90% @ full load—linear or non-linear loads
Physical Specifications
Audible Noise < 62 dBA
Dimensions (H x W x D) 26.1 in x 18.9 in x 27.8 in (with bezel)
(66.3 cm x 48.0 cm x 70.6 cm)
Weight – Fully Loaded Approximately 557 lb (133.6 kg)
Heat Dissipation (Full Load) 4246 BTUs typical – Batteries charged
9664 BTUs typical – Batteries charging
Compliance Specifications
VDE-GS Certifications EN 60950, EN 50091-1-1, EN 50091-2, IEC 60950, IEC 146-4,
VDE 0558 and VDE 0805
UL Listing UL 1778
CSA Certification CSA 107.1