Filter
Top Products
CHAPTER 2: GETTING STARTED
7
Language Setting
The factory default language of the user interface is English. You can change the language by downloading new
firmware into the PowerView. French, German, Italian, and Spanish are available on the enclosed CD. Visit the APC
web site at http://www.apc.com for multilingual product documentation and firmware language support.
To change the user interface language, perform the following steps.
Figure 3: Shown connected to
Symmetra RM 2-6 kVA
1. Remove the PowerView Display bezel
from the front of the UPS.
2. Disconnect the UPS cable from the
RJ-45 port on the PowerView.