Filter
Top Products
11-7
Cisco 819 Series Integrated Services Routers Software Configuration Guide
OL-23590-02
Chapter 11 Configuring PPP over Ethernet with NAT
Configuration Tasks
SUMMARY STEPS
1. ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length}
2. ip nat inside source {list access-list-number} {interface type number | pool name} [overload]
3. interface type number
4. ip nat {inside | outside}
5. no shutdown
6. exit
7. interface type number
8. ip nat {inside | outside}
9. no shutdown
10. exit
11. access-list access-list-number {deny | permit} source [source-wildcard]