Filter
Top Products
B-7
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Software Configuration Guide
OL-18906-02
Appendix B Concepts
Easy IP (Phase 2)
Easy IP (Phase 2)
The Easy IP (Phase 2) feature combines Dynamic Host Configuration Protocol (DHCP) server and relay.
DHCP is a client-server protocol that enables devices on an IP network (the DHCP clients) to request
configuration information from a DHCP server. DHCP allocates network addresses from a central pool
on an as-needed basis. DHCP is useful for assigning IP addresses to hosts that are temporarily connected
to the network or for sharing a limited pool of IP addresses among a group of hosts that do not need
permanent IP addresses.
DHCP frees you from having to assign an IP address to each client manually.
DHCP configures the router to forward User Datagram Protocol (UDP) broadcasts, including IP address
requests, from DHCP clients. DHCP allows for increased automation and fewer network administration
problems by:
• Eliminating the need for the manual configuration of individual computers, printers, and shared file
systems
• Preventing the simultaneous use of the same IP address by two clients
• Allowing configuration from a central site
QoS
This section describes quality of service (QoS) parameters, including the following:
• IP Precedence, page B-8
• PPP Fragmentation and Interleaving, page B-8
• CBWFQ, page B-8
• RSVP, page B-8
• Low Latency Queuing, page B-9
QoS refers to the capability of a network to provide better service to selected network traffic over various
technologies, including ATM, Ethernet and IEEE 802.1 networks, and IP-routed networks that may use
any or all of these underlying technologies. Primary goals of QoS include dedicated bandwidth,
controlled jitter and latency (required by some real-time and interactive traffic), and improved loss
characteristics. QoS technologies provide the elemental building blocks for future business applications
in campus, WAN, and service provider networks.
QoS must be configured throughout your network, not just on your router running VoIP, to improve voice
network performance. Not all QoS techniques are appropriate for all network routers. Edge routers and
backbone routers in your network do not necessarily perform the same operations; the QoS tasks they
perform might differ as well. To configure your IP network for real-time voice traffic, you need to
consider the functions of both edge and backbone routers in your network.
QoS software enables complex networks to control and predictably service a variety of networked
applications and traffic types. Almost any network can take advantage of QoS for optimum efficiency,
whether it is a small corporate network, an Internet service provider, or an enterprise network.