Filter
Top Products
5-13
Cisco 819 Series Integrated Services Router Software Configuration Guide
OL-23590-02
Chapter 5 Basic Router Configuration
Configuring WAN Interfaces
Configuring a GSM Modem Data Profile
To configure or create a new modem data profile, enter the following command in privileged EXEC
mode.
SUMMARY STEPS
1. cellular 0 gsm profile create <profile number> <apn> <authentication> <username>
<password> ipv4
DETAILED STEPS
Step 4
show cellular 0 gps
Example:
Router# show cellular 0 gps
Displays the cellular gps information.
Step 5
show cellular 0 radio
Example:
Router# show cellular 0 radio
Shows the radio signal strength.
Note The RSSI should be better than –90 dBm for
steady and reliable connection.
Step 6
show cellular 0 profile
Example:
Router# show cellular 0 profile
Shows information about the modem data profiles
created.
Step 7
show cellular 0 security
Example:
Router# show cellular 0 security
Shows the security information for the modem, such
as SIM and modem lock status.
Step 8
show cellular 0 sms
Example:
Router# show cellular 0 sms
Displays the cellular sms information.
Step 9
show cellular 0 all
Example:
Router# show cellular 0 all
Shows consolidated information about the modem,
such as the profiles that were created, the radio
signal strength, the network security, and so on.
Command or Action Purpose
Command or Action Purpose
Step 1
cellular 0 gsm profile create <profile number> <apn>
<authentication> <username> <password> ipv4
Example:
Router# gsm profile create 2 <apn-name> chap
username password ipv4
Creates a new modem data profile. See Table 5-2 for
details about the command parameters.