Filter
Top Products
5-12
Cisco 819 Series Integrated Services Router Software Configuration Guide
OL-23590-02
Chapter 5 Basic Router Configuration
Configuring WAN Interfaces
Data Account Provisioning
Note To provision your modem, you must have an active wireless account with a service provider. A SIM card
must be installed in a GSM 3G wireless card.
To provision your data account, follow these procedures:
• Verifying Signal Strength and Service Availability, page 5-12
• Configuring a GSM Modem Data Profile, page 5-13
• CDMA Modem Activation and Provisioning, page 5-14
Verifying Signal Strength and Service Availability
To verify the signal strength and service availability on your modem, use the following commands in
privileged EXEC mode.
SUMMARY STEPS
1. show cellular 0 network
2. show cellular 0 hardware
3. show cellular 0 connection
4. show cellular 0 gps
5. show cellular 0 radio
6. show cellular 0 profile
7. show cellular 0 security
8. show cellular 0 sms
9. show cellular 0 all
DETAILED STEPS
Command or Action Purpose
Step 1
show cellular 0 network
Example:
Router# show cellular 0 network
Displays information about the carrier network, cell
site, and available service.
Step 2
show cellular 0 hardware
Example:
Router# show cellular 0 hardware
Displays the cellular modem hardware information.
Step 3
show cellular 0 connection
Example:
Router# show cellular 0 connection
Displays the current active connection state and data
statistics.