Filter
Top Products
C-4
Cisco 819 Integrated Services Routers Software Configuration Guide
OL-18906-02
Appendix C ROM Monitor
Disaster Recovery with TFTP Download
TFTP Download Command Variables
This section describes the system variables that can be set in ROM monitor mode and that are used
during the TFTP download process. There are both required variables and optional variables.
Note The commands described in this section are case sensitive and must be entered exactly as shown.
Required Variables
These variables must be set with these commands before you use the tftpdnld command:
Variable Command
WAN GE setting
FE_PORT=4
Switch port setting
FE_PORT={0-3}
IP address of the router
IP_ADDRESS=ip_address
Subnet mask of the router
IP_SUBNET_MASK=ip_address
IP address of the default gateway of the router
DEFAULT_GATEWAY=ip_address
IP address of the TFTP server from which the
software will be downloaded
TFTP_SERVER=ip_address
Name of the file that will be downloaded to
the router
TFTP_FILE=filename