Filter
Top Products
B-3
Cisco CRS-1 Carrier Routing System 8-Slot Line Card Chassis Site Planning Guide
OL-5802-06
Appendix B Product IDs for the Cisco CRS-1 8-Slot Line Card Chassis
Optional MSC, PLIM, SIP, and SPA Product IDs
Optional MSC, PLIM, SIP, and SPA Product IDs
The following tables list the product IDs for the modular services cards (MSCs) and physical layer
interface modules (PLIMs) available for the Cisco
CRS-1 8-slot line card chassis.
i
Table B-2 MSC Component Product IDs
Component Product ID Description
MSC (line card)
1
1. Refer to the product data sheet for ordering details.
CRS-MSC
CRS-MSC-B
Cisco CRS-1 Layer 3 MSC
(every MSC must have an associated PLIM)
MSC impedance carrier CRS-MSC-IMPEDANCE= Blank card carrier for each empty MSC slot
(required for EMI compliance and cooling)
Table B-3 PLIM Component Product IDs
Component Product ID Description
1xOC-768
PLIM
1OC768-POS-SR= 1-port OC-768c/STM-256c PLIM, with
short-reach optics (POS)
4xOC-192
PLIM
4OC192-POS/DPT-LR= 4-port OC-192c/STM-64c PLIM, with
long-reach optics (POS or DPT)
4OC192-POS/DPT-IR= 4-port OC-192c/STM-64c PLIM, with
intermediate-reach optics (POS or DPT)
4OC192-POS/DPT-SR= 4-port OC-192c/STM-64c PLIM, with
short-reach optics (POS or DPT)
4OC192-POS/DPT-VS= 4-port OC-192c/STM-64c PLIM, with
very-short-reach optics (POS or DPT)
16xOC-48
PLIM
16OC48-POS/DPT=
POM-OC48-LR2-LC-C=
POM-OC48-SR-LC-C=
OC-48c/STM-16c PLIM, uses small form-factor
pluggable (SFP) modules (POS or DPT)
The PLIM uses 1 to 16 single-mode, long- and
short-reach optic modules (mixing allowed):
• Long-reach optics (POM-OC48-LR2-LC-C=)
• Short-reach optics (POM-OC48-SR-LC-C=)
8x10-GE PLIM 8-10GBE=
CRS-XENPAK10GB-LR=
10-GE PLIM, uses XENPAK optic modules
The PLIM uses 1 to 8 single-mode, long-reach
optic modules:
Long-reach optics (CRS-XENPAK10GB-LR=)
PLIM
impedance
carrier
CRS-INT-IMPEDANCE= Blank card carrier for each empty PLIM slot
(required for EMI compliance and cooling)