Filter
Top Products
6-13
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
OL-27644-01
Chapter 6 Installing and Upgrading Internal Modules and FRUs
Overview of the SSD Carrier Card NIM (NIM-SSD)
Figure 6-9 Opening the SSD slot cover
Step 3 Insert an SSD in the lower slot first.
Step 4 The SSD should be inserted connector end first with the connector side down and serial number facing
up (Figure 6-6).
Step 5 A second SSD may be inserted in the upper slot as shown in Figure 6-7.
Step 6 Rotate the SSD card slot cover up and into place over the SSD's.
Step 7 Re-tighten the captive fasteners on the SSD card slot cover.
Removing the SSD Drives from the NIM-SSD
To remove the SSD cards from the NIM carrier, follow these steps:
Step 1 On the NIM-SSD, loosen the captive screws retaining the NIM-SSD slot cover.
Step 2 Rotate the SSD card slot cover down, exposing the slots which hold the SSDs.
Step 3 To remove the SSD one at a time, pull the two tabs on the front of each SSD as shown in Figure 6-10.
Step 4 Rotate the SSD card slot cover up and into place over the SSDs.
Step 5 Re-tighten the captive fasteners on the SSD card slot cover.
347343
1
1. Carrier card slot cover