Filter
Top Products
6-42
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
OL-27644-01
Chapter 6 Installing and Upgrading Internal Modules and FRUs
Removing, Replacing, and Installing an Internal PoE Card
Step 2 Access the PoE card slot. See the “Removing and Replacing the Chassis Cover” section on page 6-4.
Step 3 Locate the card to be removed or replaced. See Figure 6-29 for the location of the PoE card on the
motherboard.
Figure 6-29 Location of the PoE Card
Step 4
Pull the PoE card out of the connector on the motherboard.
If replacing the card, insert the new PoE card into the slot.
Step 5 Place the removed card in an antistatic bag to protect it from ESD damage.
1
361007
1 Location of the PoE card on the mother board.