Filter
Top Products
NOTE: The storage system and expansion enclosures each require 2U of rack space for
installation.
3. Position a rail at the marked location and extend the rail to fit the rack.
4. Insert the two rail pins into the pin holes.
Figure 24. Hole Locations in Rack
1. Pin hole 2. Rack mounting screw hole
3. Pin hole
5. Insert a screw into the rack mounting screw hole and tighten the screw to secure the rail to the rack.
6. Repeat the previous steps for the second rail.
7. Slide the storage system chassis onto the rails.
Figure 25. Mount the SCv2000/SCv2020 Storage System Chassis
8. Secure the storage system chassis to the rack using the mounting screws within each chassis ear.
a. Lift the latch on each chassis ear to access the screws.
b. Tighten the screws to secure the chassis into the rack.
c. Close the latch on each chassis ear.
9. If the Storage Center system includes expansion enclosures, mount the expansion enclosures in the
rack. See the instructions included with the expansion enclosure for detailed steps.
Install the Storage Center Hardware
31