Filter
Top Products
Figure 35. Attach Label to Cable
2. Wrap the label around the cable until it fully encircles the cable. The bottom of each label is clear so
that it does not obscure the text.
Figure 36. Wrap Label Around Cable
3. Apply a matching label to the other end of the cable.
Connecting to iSCSI Host Servers
Choose the iSCSI connectivity option that best suits the front‐end redundancy requirements and network
infrastructure.
Preparing Host Servers
Install the iSCSI host bus adapters (HBAs) or iSCSI network adapters, install the drivers, and make sure that
the latest supported firmware is installed.
NOTE: Refer to the Dell Storage Compatibility Matrix for a list of supported iSCSI HBAs and network
adapters.
46
Front-End Cabling