Filter
Top Products
• If any of the Storage Center front-end ports are down, the Storage Center Front-End Ports
Down dialog box appears. Select the ports that are not connected to the storage network, and
then click OK.
2. When all of the Storage Center setup tasks are complete, click Next.
Review Fibre Channel Front-End Configuration
For a Storage Center with Fibre Channel front-end ports, the Fault Domains page displays an example
fault domain topology based on the number of controllers and type of front-end ports. The Review
Front-End Configuration page displays information about the fault domains created by the
Storage
Center.
1. (Optional) On the Fault Domains page, click More information about fault domains to learn more
about fault domains.
2. Click Next.
3. On the Review Front-End Configuration page, make sure that the information about the fault
domains is correct.
4. Using the information provided on the Review Front-End Configuration page, configure Fibre
Channel zoning to create the physical and virtual zones described in Fibre Channel Zoning.
5. Click Next.
Review SAS Front-End Configuration
For a Storage Center with SAS front-end ports, the Fault Domains page displays an example fault domain
topology based on the number of controllers and type of front-end ports. The Review Front-End
Configuration page displays information about the fault domains created by the
Storage Center.
1. (Optional) On the Fault Domains page, click More information about fault domains to learn more
about fault domains.
2. Click Next.
3. On the Review Front-End Configuration page, make sure that the information about the fault
domains is correct.
4. Click Next.
Configure Time Settings
Configure an NTP server to set the time automatically or set the time and date manually.
1. From the Region and Time Zone drop-down menus, select the region and time zone used to set the
time.
2. Select Use NTP Server and enter the host name or IPv4 address of the NTP server, or select Set
Current Time and set the time and date manually.
3. Click Next.
Configure SMTP Server Settings
Enable SMTP email to receive information from the Storage Center about errors, warnings, and events.
1. Place a check next to Enable SMTP Email.
2. Enter the SMTP mail server, backup SMTP mail server, email address, and subject line information.
80
Discover and Configure the Storage Center