Filter
Top Products
Figure 76. Disconnect B-Side Cables from the Storage Controllers
1. Storage system 2. Storage controller 1
3. Storage controller 2 4. Expansion enclosure 1
5. New expansion enclosure (2)
2. Move the cable from expansion enclosure 1: bottom EMM, port B to the new expansion enclosure
(2): bottom EMM, port B.
3. Use a new SAS cable to connect expansion enclosure 1: bottom EMM, port B to the new expansion
enclosure (2): bottom EMM, port A.
Figure 77. Connect B-Side Cables to the New Expansion Enclosure
1. Storage system 2. Storage controller 1
98
Adding or Removing an Expansion Enclosure