Filter
Top Products
7 - 4
KEY FUNCTIONS
ETC00781(4) Series 100 e 02/2004
7.2 ENTER
The ENTER - key (Fig. 1-1 and 1-2, Item 4) is used for the transfer of (keyed-in) numerical data
to the corresponding operating parameters and for the initiation of certain operations, such as
zeroing and spanning.
First time the ENTER key is pressed within the function sequences (following the sequences
from "Zeroing (0 - 1)" to the "interface - parameter (SIP.)") the display will show the message
This indicates that - for safety reasons - a password (user code, “CODE”) must be entered in
order to enable access to the specific level.
If a wrong password is entered, the “CODE” display will remain and the display will be reset
to the value “0”.
When the correct password has been entered access to the specific level is permitted.
This password (“CODE”) has a factory
setting value “1” !
ENTER