Filter
Top Products
7 - 7
KEY FUNCTIONS
ETC00781(4) Series 100 e 02/2004
7.4 PUMP (BINOS
®
100 2M/F only)
Optionally there is built-in a gas sampling pump (pumping rate max. 2,5 l/min.) into analyzers
of type BINOS
®
100 2M/F.
The pump can be switched on and switched off by either
• the key “PUMP” at the front panel [Fig. 1-2, Item 8, (standard BINOS
®
100 2M/F only)],
• the keypad [System Parameter “PUMP”
*)
(chapter 8.17)],
• via optional RS 232/485 instructions
*) **)
(chapter 12.5),
• via optional FOUNDATION
™
Fieldbus instructions
*) **)
(chapter 13.2) or
• via optional digital inputs
*) **)
(chapter 13.1).
Optional the status of gas sampling pump is output via a digital status signal "Pump"(see Item
11.3)!
If the pump is turned on a green LED (PUMP, Fig. 1-2, Item 3) will light up at the front panel.
*)
BINOS
®
100 2M from program version 5.0 is required
**)
not in combination with FOUNDATION
™
Fieldbus
***)
not in combination with RS 232/485 interface
PUMP (BINOS
®
100 2M/F ONLY)
PUMP