Filter
Top Products
SERIAL INTERFACE (OPTION)
12 - 11
ETC00781(4) Series 100 e 02/2004
12.5 Instruction Syntax
Code definitions:
RP: receive parameters analyzer is accepting values
SP: send parameters analyzer is sending values
RI: receive instructions
k: channel numbers 0 to 2
m: range number
w: value
<ID>: analyzer ID - no. for RS 485 mode of operation; follows start character
LPB: message - length parity byte
<CR>: terminate character
Receipt of any instruction codes not listed in the following section will be acknowledged by
transmittal of status code 106. Future expansions will make use of code numbers not currently in
use.
INSTRUCTION SYNTAX