A SERVICE OF

logo

140 01-28007-0068-20041203 Fortinet Inc.
Configuring IPSec VPN for a virtual domain System virtual domain
Configuring IPSec VPN for a virtual domain
To configure VPN for a virtual domain
The following procedure applies to NAT/Route and Transparent mode.
1 Go to System > Virtual domain > Virtual domains.
2 Select Change following the current virtual domain name above the table.
3 Choose the virtual domain for which to configure VPN.
4 Select OK.
5 Go to VPN.
6 Configure IPSec VPN, PPTP, L2TP, and certificates as required. See “VPN” on
page 245.