Filter
Top Products
Log & Report Viewing log messages
FortiGate-100A Administration Guide 01-28007-0068-20041203 349
To enable traffic logging for a firewall policy
You can enable traffic logging for a firewall policy. All connections accepted by the
firewall policy are recorded in the traffic log.
1 Go to Firewall > Policy.
2 Select the Edit icon for a policy.
3 Select Log Traffic.
4 Select OK.
5 Make sure you enable traffic log under Log Filter for a logging location and set the
logging severity level to Notification or lower.
Log access
Log Access provides access to log messages saved to the memory buffer. You can
view and search logs.
This section describes:
• Viewing log messages
• Searching log messages
Figure 186:Sample list of logs stored on the FortiGate disk
Viewing log messages
You can view log messages saved to the memory buffer.
Figure 187:Viewing log messages