Fortinet 100A Router User Manual


 
FortiGate-100A Administration Guide Version 2.80 MR7
FortiGate-100A Administration Guide 01-28007-0068-20041203 73
System DHCP
You can configure DHCP server or DHCP relay agent functionality on any FortiGate
interface or VLAN subinterface.
A FortiGate interface can act as either a DHCP server or as a DHCP relay agent. An
interface cannot provide both functions at the same time.
This section describes:
Service
Server
Exclude range
IP/MAC binding
Dynamic IP
Service
Go to System > DHCP > Service to configure the DHCP service provided by each
FortiGate interface. You can configure each interface to be a DHCP relay or a DHCP
server or you can turn off DHCP services.
Figure 20: DHCP service list
Note: To configure DHCP server or DHCP relay functionality on an interface, the FortiGate unit
must be in NAT/Route mode and the interface must have a static IP address.
Interface List of FortiGate interfaces.
Service The DHCP service provided by the interface (none, DHCP Relay, or DHCP
Server).
Edit/View icon. Select to view or modify the DHCP service configuration for
an interface.