Filter
Top Products
Router Offset list
FortiGate-100A Administration Guide 01-28007-0068-20041203 153
Offset list
Use offset lists to add the specified offset to the metric of a route.
Figure 64: RIP Offset list
Offset list options
Figure 65: RIP Offset list configuration
To configure an offset list
1 Go to Router > RIP > Offset List.
2 Select Create New to add a new offset list or select the edit icon beside an existing
offset list to edit that offset list.
Note: By default, all offset lists for the root virtual domain are displayed. If you create additional
virtual domains, the offset lists belonging to the current virtual domain only are displayed. To
view the settings associated with a different virtual domain, go to System > Virtual Domain >
Virtual Domains and select the virtual domain.
Create New Add a new offset list.
Direction The direction for the offset list.
Access-list The access list to use for this offset list.
Offset The offset number to add to the metric for this offset list.
Interface The interface to match for this offset list.
Enable The status of this offset list.
The Delete and Edit icons.
Direction Select In to apply the offset to the metrics of incoming routes. Select out
to apply the offset to the metrics of outgoing routes.
Access-list Select the access list to use for this offset list. The access list is used to
determine which routes to add the metric to.
Offset Enter the offset number to add to the metric. Enter a number from 1 to 16.
Interface Select the interface to match for this offset list.
Enable Select Enable to enable this offset list.