Filter
Top Products
-4-
Model G0763 (Mfg. Since 8/13)
Refer to Figures 1–4 and the following descrip-
tions to develop an understanding of the basic
controls used to operate the surface grinder. This
knowledge will be necessary to safely complete
the Test Run later in this manual.
Additional details for certain controls are also
located in the Operations section.
Master Power Switch
Basic Controls
Master Power Switch: Enables power to flow to
the machine when the “l” is visible through the
switch.
Grinding Wheel & Coolant Controls
A. Power Lamp: Lights when power is flowing
to the machine.
B. Coolant Pump ON Button
C. Coolant Pump OFF Button
D. Grinding Motor OFF Button
E. Grinding Motor ON Button
F. Emergency STOP Button: Disables power
to grinding wheel motor and coolant pump.
To reset, twist the button clockwise until it
pops out.
Figure 1. Location of master power switch.
Master
Power Switch
Figure 2. Grinding wheel and coolant controls.
A
B
C
F
E
D