Filter
Top Products
Model G0763 (Mfg. Since 8/13)
-5-
Power Feed Controls
Refer to Power Feeds on Page 31 for detailed
instructions on operating the power feeds.
G. ON/OFF Switch: Enables power to the power
feed unit.
H. X-Axis Speed Control Knob: Controls the
speed of table movement along the X-axis.
I. Y-Axis Speed Control Knob: Controls the
speed of table movement along the Y-axis.
J. Y-Axis Mode Selector Switch: Selects the
mode of operation for the Y-axis—jog (the
“T”), manual (the “hand”), or automatic (the
“table” symbol).
K. Y-Axis Reverse Button: Reverses the direc-
tion of Y-axis table movement.
L. X-Axis Mode Selector Switch: Selects the
mode of operation for the X-axis—manual
(the “hand”) or automatic (the “table” symbol).
Handwheels
M. X-Axis Handwheel: Manually controls X-axis
table movement.
N. Y-Axis Handwheel: Manually controls Y-axis
table movement. The graduated dial has
0.0005" increments with one full revolution
equaling 0.1000" of table travel.
O. Coolant Valve: Controls the flow of coolant
when coolant pump is turned ON.
P. Z-Axis Handwheel: Manually controls Z-axis
grinding wheel movement. The graduated
dial has 0.0002" increments with one full
revolution equaling 0.0500" of table travel.
Figure 3. Power feed controls.
G
H
I
J
L K
Figure 4. Handwheel controls.
P
N
M
O