Filter
Top Products
32
2. Drive implementation
ATV61HC22N4
Maximum terminal wire size/tightening torque
Power supply for the fans, compulsory if the drive is only powered by the DC bus. Do not use if the drive is powered with a 3-phase supply
by L1/R, L2/S, L3/T.
Drive terminals L1/R, L2/S, L3/T, U/T1, V/T2, W/T3 PC/-, PO, PA/+ PA, PB RO, SO, TO
(1)
2 x 150 mm
2
/41 Nm 2 x 150 mm
2
/41 Nm 120 mm
2
/24 Nm 5.5 mm
2
/1.4 Nm
2 x 350 MCM/360 lb.in 2 x 350 MCM/360 lb.in 250 MCM/212 lb.in AWG 10/12 lb.in
PO PA/+ PC/-
PA PB
U/T1 V/T2
R/L1
W/T3
S/L2 T/L3
286 (11.20)
321 (12.58)
270 (10.58)
251 (9.83)
319,50 (12.52)
260 (10.18)
319,50 (12.52)
112 (4.39)
40 (1.57)
47 (1.84)
100 (3.92) 150 (5.88)
104 (4.07)
80 (3.13)
74 (2.90)
68 (2.66)
102 (4.00)74 (2.90)
21 (0.82) 104 (4.07) 102 (4.00)
114 (4.47) 102 (4.00)
357 (13.99)
38 (1.49)
M12
M12
M12
M8
M12
View from below
View from above
Front view
Fan terminals
(1)