Filter
Top Products
5
Altivar 38 hardware identification
Before selecting the Altivar 61, the Altivar 38 hardware configuration needs to be determined carefully.
1
Measure the line voltage and indicate the type of power supply:
Line voltage:_________V Three-phase
2
Note down the drive catalog number, which appears on the Altivar 38 nameplate:
ATV38______________________
3
Note down the catalog number of any EMC filter installed under the drive:
VW3A584 ___________________
4
Note down the catalog number of any option cards installed in the Altivar 38; this can be found on the label attached to the card:
VW3A58_____________________
5
Note down whether the operator terminal is used:
VW3A58101: YES NO
Is the operator terminal connected remotely on the enclosure
door?
YES NO
6
Note down the catalog number of the NEMA type 1 mounting kit, if used:
VW3A5885___________________
7
Note down the catalog number of the control card fan kit, if used:
VW3A5882___________________
8
Make sure you have the diagrams for the existing installation.
ATV38HD16N4
Motor Rating : 11 kW / 15HP
Input V : 380/460V-50/60Hz
Input phase : 3
Input I : 35.4/28 A
Input fuse : Type J : 60A Max
Output 3 Ph : 380/460V
Output I : 22A
Output I max. transient (1mn) : 24.2A
Output frequency : 0.1-500Hz
Serial N . 1703001070 France - 6W 0202
LISTED 170M
IND.CONT.EQ
Cu AWG 6 : 75˚C : 20lb-in/2.26 Nm
Motor Protective Device
AIC 22000 A Protection type Classe 20
N998