Filter
Top Products
73
3. Implementation of the communication option cards
3. 12. Application-specific option cards
Please refer to the Altivar 61 Programming Guide for information about how to use these different functions.
Pump card VW3A58210
This card is continued on the Altivar 61 and its catalog number is VW3A3502. The functions of the two cards
are identical.
Multi-motor card VW3A58211
Compatibility can be assured by adding an extended I/O option card VW3A3202 providing access to AI3
and LO and requires the multi-motors function to be configured manually, because the PowerSuite software
workshop cannot access data stored on the old option card. To do this, in menu:
[1.7 APPLICATION FUNCT.] (FUn-) adjust [MULTIMOTORS/CONFIG.] (MMC-).
Multi-parameter card VW3A58212
This card has not been continued on the Altivar 61H.
Only the parameter-switching function is integrated on the ATV61 and supports the switching of 3 sets of
15 selectable parameters.
[1.7 APPLICATION FUNCT.] (FUn-) then [PARAM. SET SWITCHING] (MLP-)
For other operating modes (indexing, sequencing functions, etc.), it is necessary to use the Controller Inside
card.