Filter
Top Products
Digital Dosing Units
6
1.2 Keys and Symbols
Recipe Storage/Recall: For saving, recalling or modifying recipes.
Stop: Stops the continuous operation of the feeder. Will reset the totalizer
showing metered amount of additive to zero if depressed for two seconds.
Up-arrow: For increasing the set value in decimal increments.
Down-arrow: For decreasing the set value in decimal increments.
Arrow Key: For fast increasing/decreasing of the set value in larger increments.
Must be pressed simultaneously with the up- or down-arrow.
Run: Starts the continuous operation (LED is lit up) or calibration mode (LED
flashes)
Calibration Key: Switches from operation to calibration mode. LED flashes
when calibration process has started.
Input: Selects the next screen for the input of program parameters.