Filter
Top Products
Prestige 1100 Internet Access Router
Hardware Installation & Initial Setup 2-13
2.10 General Ethernet Setup
This menu allows you to specify the filter sets that you wish to apply to the Ethernet traffic. You
seldom need to filter Ethernet traffic, however, the filter sets may be useful to block certain packets,
reducing traffic and preventing security breaches.
From Menu 3 - Ethernet Setup, enter 1 to go to Menu 3.1 -General Ethernet Setup.
Figure 2-11 Menu 3.1 - General Ethernet Setup
If you need to define filters, please read the Filter Set Configuration Chapter, then return to this
menu to define the filter sets.
2.11 Protocol Dependent Ethernet Setup
For the protocol-dependent setup, go to the appropriate section for details:
l For TCP/IP Ethernet Setup refer to - Internet Access Application.
l For Novell IPX Ethernet Setup refer to - IPX Ethernet Setup in - Novell IPX Configuration for
LAN-to-LAN.
l For Bridge Ethernet Setup refer to - Bridge Configuration for LAN-to-LAN.
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: