Filter
Top Products
Prestige 1100 Internet Access Router
3-4 Internet Access
Figure 3-2 Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Table 3-1 DHCP Ethernet Setup Menu Fields
Field Description Example
DHCP Setup
DHCP= This field enables/disables the DHCP server or client. If it is set
to [Server], your Prestige will act as a DHCP server. If set to
[None], the DHCP server will be disabled. If set to [Client], the
Prestige will request an IP address from the Ethernet that has
this field set to [Client. ]The Ethernet that has this field set to
[Client ]also has multicast support ([Multicast= None]) disabled.
When DHCP [Server] is used, the following items need to be
set:
[None](default)
[Server]
[Client]
Client IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the
IP address pool.
192.168.1.33
Size of Client IP Pool This field specifies the size, or count, of the IP address pool. 6
Primary DNS Server
Secondary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= None
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast = IGMP-v2
IP Policies=
SUA= No
Enter here to Confirm or ESC to Cancel:
Press Space Bar to Toggle.