Filter
Top Products
3. INSTALLATION
BAS-300G, BAS-311G, BAS-326G
17
3-14. Installing the eye guard
CAUTION
Attach all safety devices before using the sewing machine.
If the machine is used without these devices attached, injury may result.
(1) Screw (loosen)
(2) Eye guard (tilt forward)
(3) Eye guard assembly
(4) Plain washers [2 pcs.]
(5) Screws [2 pcs.]
After installing the eye guard assembly
(3), return the eye guard (2) to its original
angle, and then tighten the screw (1) to
secure it in place
3-15. Installing the motor cover
(1) Motor cover R
(2) Screws [4 pcs.]
(3) Motor cover L
(4) Screws [4 pcs.]
(5) Motor cover
(6) Screws [4 pcs.]
NOTE:
Be careful not to clamp the cords when
installing the motor cover.
2367B
2976B
2975B