Filter
Top Products
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
BAS-300G, BAS-311G, BAS-326G
40
6
Next, set the work clamp height
(motor-driven work clamp specifications only).
THREAD/CLAMP indicator flashes
Press the SELECT key.
Press the or key to set the work clamp height to
be recorded.
7
Next, set the intermediate work clamp height
(when memory switch No. 003 is set to “2”
for motor-driven work clamp specifications).
THREAD/CLAMP indicator flashes
Press the SELECT key.
Press the or key to set the intermediate work
clamp height to be recorded.
8
Next, set the intermittent presser foot height.
THREAD/CLAMP indicator flashes
Press the SELECT key.
Press the or key to set the intermittent presser foot
height to be recorded.
9
TEST indicator illuminates, MENU indicator flashes
Press the SELECT key.
• If setting further user programs, select the user
program number and then repeat steps 2 to 9.
10
End user program recording mode.
TEST indicator switches off, MENU indicator illuminates
Press the TEST key.
This completes the recording of a user program.
• The user program number will flash in the PROGRAM
No. display, and the sewing machine will switch to
home position detection standby.
4967Q
4968Q
4970Q
4971Q
4969Q