Brother BAS-300G Welding System User Manual


 
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
31
BAS-300G, BAS-311G, BAS-326G
5-7. Setting the work clamp lift amount
The setting for the work clamp lift amount can be changed using the operation panel.
* For pneumatic work clamp specifications, only threading mode and intermittent presser foot height setting mode will be
available.
1
THREAD/CLAMP indicator illuminates
MENU indicator switches off
Press the THREAD/CLAMP key.
The sewing machine will switch to threading mode.
" 1" will appear in the PROGRAM No. display, and the work
clamp will drop.
2
Motor-driven work clamp specifications only
Press the key.
The sewing machine will switch to work clamp height setting
mode.
" 2" will appear in the PROGRAM No. display, and the work
clamp will rise to the setting value that appears in the menu
display.
(Work clamp height setting: 15 25)
Press the or key to set the work clamp height.
The work clamp will rise or drop to the height of the new value
that has been set.
When memory switch No. 003 is set to "2"
Press the key.
The sewing machine will switch to intermediate work clamp
height setting mode.
" 3" will appear in the PROGRAM No. display, and the
work clamp will move to the setting value that appears in
the menu display.
(Intermediate work clamp height setting: 1 15)
Press the
or key to set the intermediate work clamp
height.
The work clamp will rise or drop to the height of the new
value that has been set.
NOTE:
When setting the work clamp height and the
intermediate presser foot work clamp height, check
that the slider (1) is touching the work clamp lifter
plate assembly (2).
4445Q
All indicators switch off
5224Q
4959Q
5254Q