Emerson Process Management X-STREAM X2 Series Welding Consumables User Manual


 
Emerson Process Management GmbH & Co. OHGS-8
X-STREAM X2
Short Form Manual
HASX2E-SFM-HS
02/2012
Safety Instructions
EXPLOSION HAZARD
The units described in this manual may not be used in explosive atmospheres
without additional safety measures.
ELECTRICAL SHOCK HAZARD
Do not operate without covers secure. Do not open while energized.
Installation requires access to live parts which can cause death or serious
injury.
For safety and proper performace this instrument must be connected to a
properly grounded three-wire source of power.
TOXIC GASES
This unit’s exhaust may contain toxic gases such as (but not limited
to) e.g. sulfur dioxide. These gases can cause serious injuries.
Avoid inhaling exhaust gases.
Connect the exhaust pipe to a suitable ue and inspect the pipes regularly
for leaks.
All connections must be airtight to avoid leaks:
page 3-2 for
instructions on performing a leak test.
HIGH TEMPERATURES
Hot parts may be exposed when working on photometers and/or
heated components
in the unit.