Filter
Top Products
Emerson Process Management GmbH & Co. OHG 3-1
X-STREAM X2
Short Form Manual
HASX2E-SFM-HS
02/2012
3
Startup
Chapter 3
Startup
Once the unit has been unpacked and in-
stalled, it is recommended to make some
adjustments (e.g. select the language) and
to perform some basic procedures (leak test
and calibrations).
In order for the information in this chapter
to be of any relevence, the unit must have
been installed according to the instructions
in chapter 2.
For more detailled information on the topics
described in this chapter, read chapter 5 of
the X-STREAM X2 instruction manual.
OPERATION AT LOW TEMPERATURES
When operating an instrument at temperatures below 0 °C (32 °F), do
NOT apply gas nor operate the internal pump before the warmup time has
elapsed!
Violation may result in condensation inside the gas paths or damaged
pump diaphragm!
Consider the related instructions in the X-STREAM X2 series manual!
The USB-Stick shipped with
your analyzer contains impor-
tant analyzer specic data in
the subfolder "Analyzer Docu-
mentation"!
To protect against data loss,
• print out and store in a safe
place all the les
or
• copy the subfolder to ano-
ther data storage medium!