Filter
Top Products
Emerson Process Management GmbH & Co. OHG 2-9
X-STREAM X2
Short Form Manual
HASX2E-SFM-HS
02/2012
2
Installation
2.6 Detailed Instructions for Installation
2.6 Detailed Instructions for Installation
Important note for X-STREAM X2FD!
Due to the special conditions which must be observed when installing units in EX zones, the
installation of the ameproof X-STREAM X2FD version is described in a separate instruction
manual HASXMDE-IM-EX.
Even if you do not install your X-STREAM X2FD in an EX zone, refer to this separate manual for
installation instructions.
Installation instructions: X-STREAM X2GK, X2GP page 2-10
X-STREAM X2XF Field housings page 2-15
Notes for wiring signal inputs and outputs page 2-23
Important note for analyzers measuring traces of oxygen!
The electrochemical sensor used for this measurement is a consumable. Remaining lifetime
counts down when the sensor is in contact with oxygen.
For above reasons, concerned analyzers are shipped with the sensor as extra item in a sealed bag!
The sensor must be installed before analyzer startup, according the instructions shipped with
the sensor!