Emerson Process Management X-STREAM X2 Series Welding Consumables User Manual


 
Emerson Process Management GmbH & Co. OHG S-9
X-STREAM X2
Short Form Manual
HASX2E-SFM-HS
02/2012
S
Safety Instructions
Safety Instructions
HEAVY INSTRUMENT
The eld housing variations intended for outside and wall mounted use
weigh between 26 kg (57 lb) and 63 kg (139 lb) depending on variation and
options installed.
Two people and/or lifting equipment is required to lift and carry these
units.
Take care to use anchors and bolts specied to be used for the weight of
the units!
Take care the wall or stand the unit is intended to be installed at is solid
and stable to support the weight!
CRUSHING HAZARD
Take care of crushing hazard when closing the front door of analyzer eld
housings!
Keep out of the closing area between enclosure cover and base!
OPERATION AT LOW TEMPERATURES
When operating an instrument at temperatures below 0 °C (32 °F), do
NOT apply gas nor operate the internal pump before the warmup time has
elapsed!
Violation may result in condensation inside the gas paths or damaged pump
diaphragm!
HIGH TEMPERATURES
Hot parts may be exposed when working on photometers and/or heated
components in the unit.