Filter
Top Products
Emerson Process Management GmbH & Co. OHG1-6
X-STREAM X2
Short Form Manual
HASX2E-SFM-HS
02/2012
1.3 X-STREAM X2GK
This compact model for general purposes
can be tted with up to three measurement
channels in various combinations. Power is
supplied by an internal wide range power sup-
ply or a separate external power supply unit.
By default the units are congured for tabletop
use. A carrying handle is optional available
which makes it easy to take the instrument to
varying sampling points. For rack mounting a
X2GK is xed by screws located at the front
panel.
Connection to power supply
AC is supplied by an IEC chassis plug with
power switch and fuse holders. The internal
wide range power supply unit enables the
analyzers to be used worldwide. Optionally
DC 24 V power is supplied via a 3-pin socket
at the rear of the unit.
Interfaces
Electrical connections for interface signals are
provided via submin-D and Ethernet connec-
tors mounted on the rear panel of the device
(
Fig. 1-2
).
Gas connections
Depending on the conguration of the unit
(number of measurement channels and serial
or parallel connection), sample and calibration
gases are fed into the unit via up to 8 tube
ttings mounted on the rear panel. Any free
tube ttings can be used for purging the de-
vice
to minimize interference from the ambient
atmosphere,
or
when measuring corrosive and/
or ammable gases.
1.3 X-STREAM X2GK: ½ 19 Inch Table-Top Unit