Emerson Process Management X-STREAM X2 Series Welding Consumables User Manual


 
Emerson Process Management GmbH & Co. OHG2-14
X-STREAM X2
Short Form Manual
HASX2E-SFM-HS
02/2012
3
Power supply
Optional DC Supply for X-STREAM X2GK
24 VDC is supplied to the unit by means of a
three-pin XLR connector on the rear panel of
the instrument.
Depending on the order, the following is sup-
plied as an accessory: either
an external power supply unit which can
be connected directly to the analyzer using
the supplied cable
or
a connector which can be used with a cab-
le and PSU as specied by the customer.
Note the conguration of the connector´s pins
(
Fig. 2-8).
X-STREAM X2GK and X2GP
AC power is supplied to the unit by means of
a three-pin IEC connector on the rear panel
of the instrument.
Fig. 2-8: Power supply connectors
Details of any PSUs supplied with the unit are
given by the X-STREAM instruction manual.
X2GP AC connectors X2GK
DC connector X2GK
2.6 Installation - X-STREAM X2GK, X-STREAM X2GP