GE EPM 6000 Multi-function Power Metering System Power Screwdriver User Manual


 
3–16 EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
CHAPTER 3: INSTALLATION
3.3.8 Current-Only Measurement (Three-Phase)
For this wiring type, select 3ELWYE (3 Element Wye) in the meter programming setup.
Note
Even if the meter is used only for current measurement, the unit requires a AN volts
reference. Please ensure that the voltage input is attached to the meter. AC control power
can be used to provide the reference signal.