Filter
Top Products
CHAPTER 4: USING THE METER
EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE 4–9
4.3 Changing Settings in Configuration Mode
4.3.1 Description
The following procedure describes how the navigate the configuration mode menu.
Z Press the MENU Button from any of the auto-scrolling readings.
Z Press DOWN to display the configuration mode (
CFG) in the “A”
screen.
w Press ENTER to scroll through the configuration parameters,
starting at the
SCrL Ct Pt screen.
Z Push the DOWN Button to scroll all the parameters: scroll, CT, PT,
connection (
Cnct) and port.
The active parameter is always flashing and displayed in the “A”
screen.
4.3.2 Configuring the Scroll Feature
Use the following procedure to configure the scroll feature.
Z Press the ENTER button to display the
SCrL no message.
Z Press the RIGHT button to change the display to
SCrL YES as
shown below.
FIGURE 4–6: Scroll Mode Configuration