Filter
Top Products
4–2 EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
CHAPTER 4: USING THE METER
FIGURE 4–1: EPM 6000 Faceplate Elements
4.1.3 Faceplate Buttons
The following functions can be performed using the MENU, ENTER, DOWN and RIGHT
buttons:
• View meter information
•Enter display modes
• Configure parameters (password protected)
• Perform resets
• Perform LED checks
• Change settings
• View parameter values
• Scroll parameter values
•View limit states
The faceplate buttons function as follows:
• Enter button: Press and release the ENTER button to select one of four display
modes: operating mode (default), reset mode (press ENTER once, followed by
DOWN), settings mode (press ENTER twice, followed by DOWN), and configuration
mode (press ENTER three times, followed by DOWN).
• Menu button: Press and release to navigate the configuration menu and again to
return to the main menu.
• Right button: Press the RIGHT button to enter the menus for the operate, reset,
settings, and configuration mode.
• Down button: Press the DOWN button to scroll through the menus for each of the
modes.
In operating mode (default), the faceplate buttons are used to view parameter values. In
reset mode, the buttons are used to restore maximum and minimum values. In settings
mode, the buttons are used to view settings parameters and change the scroll setting. In
configuration mode, the buttons are used to change meter configuration (in this case, they
can be password protected).
Parameter
designator
Watt-hour
pulse
% of Load Bar
IRDA communications
port
Reading
type indicator