Filter
Top Products
308584 51
Technical Data
Category Data
Weight 1.87 lb (0.85 Kg)
Gun Length 9.5 in. (240 mm)
Maximum Working
Pressure
100 psi (0.7 MPa, 7 bar)
Air Pressure Operating
Range
0–100 psi (0–0.7 MPa,
0–7 bar)
Fluid Pressure Operating
Range
0–100 psi (0–0.7 MPa,
0–7 bar)
Voltage Output 0–65 kV*
Air Inlet 1/4 npsm(m) L.H.
Fluid Inlet custom inlet for Graco
waterborne fluid hose
Fluid Specification For use with fluids that
meet at least one of the
following conditions:
D The fluid has a flash
point above 140_F
(60_C) and a maxi-
mum organic solvent
concentration of 20%,
by weight, per ASTM
Standard D93.
D The fluid does not
sustain burning when
tested per ASTM
Standard D4206 Sus-
tained Burn Test.
Category Data
Wetted Parts Stainless Steel, Brass,
Nylon, Acetal, PTFE,
Fluoroelastomer, PTFE
High Molecular Weight
Polyethylene, Ceramic
Typical Noise Level with
atomization air at 40 psi
(280 kPa, 2.8 bar) and
typical air flow
Sound Pressure {
Sound Power }
87 Db(A)
90.4 Db(A)
Maximum Noise Level
with atomization air at
100 psi (0.7 MPa, 7 bar)
and maximum air flow
Sound Pressure {
Sound Power }
99 Db(A)
105.4 Db(A)
{ Sound pressure was measured per Cagi Pneurop, 1969.
} Sound power was measured per ISO–3744, 1981.
* Voltage output when used with Graco H
2
O PRO is 0–59
kV due to bleed resistor current draw.
Vitonr is a registered trademark of the
DuPont Co.
Loctiter is a registered trademark of the Loctite Corporation.