Honeywell SC1000 Stud Sensor User Manual


 
page 10 008-0608-00
operate and calibrate Strain-Gage Input Channels with your transducers.
Chapter 11, “AC/AC-LVDT Input Channel”, explains how to wire, configure, operate
and calibrate AC/AC-LVDT Input Channels with your transducers.
Chapter 12, “High-Level Input Channel”, explains how to wire, configure, operate
and calibrate High-Level Input Channels with your amplified transducers, in-line ampli-
fiers, or DC-DC LVDTs.
Chapter 13, “Relay Output Channel”, describes how a Relay Output channel can
enable additional limits in the instrument.
Chapter 14, “DAC Output Channel”, explains the configuration and operation of
additional digital-to-analog voltage or current outputs.
Chapter 15, “Split Display Virtual Channel”, shows how you can display two values
from any of the channels in the instrument at the same time.
Chapter 16, “Mathematics Virtual Channel”, describes the flexibility of customer-
specific SensoCode programming.
Chapter 17, “Error Messages”, lists error messages that the instrument may display,
describes their causes and, where possible, suggests solutions.
Chapter 18, “Setup Menu Reference”, is a list of all SETUP menus and a cross-ref-
erence to related information in this instruction manual.