Filter
Top Products
page 22 008-0608-00
3.4 ERROR mode
The instrument enters the ERROR mode when a critical error occurs that prevents the
instrument from operating. The display alternates between displaying a two-digit code
in the form “ERROR xx ON CH.yy” and a short description of the error. The first two
digits “xx” hold the error code. The last two digits, “yy” is channel number that caused
the error. For example, “
ERROR 60 ON CH.01
” indicates that error number 60 occurred on
channel 1.
While the instrument is in the ERROR mode, no other operations are taking place
except for limited serial communications capabilities. See “Error Message List” on
page 152 for a list of error codes and their probable causes.