Filter
Top Products
page 62 008-0608-00
10.4 Specifications
TRANSDUCER INPUT
Transducer type full-bridge, strain gage
Excitation Voltage 5 or 10 VDC,
short circuit protected with sensing
Transducer full-scale output .5 to 11.0 mV/V @ 5V excitation
.5 to 5.5 mV/V @ 10 V excitation
Amplifier Gain Selection automatic
Calibration Type shunt, mV/V or
2-, 3- or 5- point known load
Differential Input Voltage +/- 55mV (max.)
A/D Converter 24-bit Sigma-Delta
Low-pass filter digital, 24-tap FIR
Resolution and Frequency Response see “
FREQ. RESPONSE
Menu Item” on
page 63
INSTRUMENT-ONLY ACCURACY
(Sense wires used;Frequency Response setting<=16Hz;
Linearity, repeatability & hysteresis)
mV/V Calibration ±0.1% F.S.
Known -Load Calibration ±0.01% F.S.
AUXILLIARY INPUTS
Quantity 2
Type momentary contact closure
Response Time < 5ms
Field-Selectable Functions tare on, tare off,
peak/valley clear, peak/valley hold,
track hold
ANALOG OUTPUT
Output voltage range 5, ±5, 10 or ±10 VDC (field selectable)
Output current range (optional current
output channels)
4-20 mA
Source any channel’s track, peak or valley value
Isolation 500V
Resolution 13 bits
Frequency Response same as input when driven by the same
channel’s tracking data