Honeywell SC1000 Stud Sensor User Manual


 
page 32 008-0608-00
Step 2: Pull the front panel assembly out of the case.
Step 3: Proceed with Model SC2000 “Case Removal” on page 28.
4.4.5 Internal Arrangement
See the Model SC2000 “Internal Arrangement” on page 29.
4.4.6 Cleaning
Turn off the instrument and unplug all connectors. Use a soft cloth or tissue and a
mild cleaner. Do not use liquid or aerosol cleaners. Do not allow any cleaner
inside the instrument.
4.4.7 Vehicle Power Option
The Model SC2001 is available with a vehicle power option for operation with bat-
teries and linear DC power supplies. See “Specifications” on page 26 voltage and
power requirements..
4.4.8 Fuse Replacement
The power-line fuses of AC-powered instruments are located within the instru-
ment's power entry module on the rear panel. Use two 2A, 250V fast-blow fuses
(p/n 029-3026-00).
NOTICE
Due to the momentary startup inrush current of the instrument’s power supply,
the use of switching power supplies with the SC are not recommended.