Honeywell SC1000 Stud Sensor User Manual


 
SC Series Instruction Manual page 105
High-Level Input Channel12
12.2.8 Low Voltage DC-DC
LVDTs
Use the following wiring diagram when connecting a low-voltage DC-DC LVDT to
a High-Level Input channel. Examples of such devices include
Models DLB, DLE and DLF DC-DC LVDTs
The High-Level Input channel’s Configuration Jumpers must be set as follows for
proper operation. See “Excitation and Signal Jumpers” on page 106.
(+)Excitation supply: “+12 VDC”
(-)Excitation supply: “GND”
Signal type: “voltage”
Signal reference: “single ended”
Figure 12-7: “Low Voltage” DC-DC LVDT Connection to High-Level Input Channel