IBM EGX-600 Engraver User Manual


 
7
To Ensure Safe Use
Please use a vacuum cleaner to re-
move cutting dust.
Do not use any blower like airbrush.
Otherwise, dust spread in the air may harm
your health.
To Ensure Safe Use
Do not use with a damaged power
cord or plug, or with a loose electri-
cal outlet.
Doing so may lead to
fire, electrical shock,
or electrocution.
Do not damage or modify the electri-
cal power cord, subject it to exces-
sive bending, twisting, pulling, bind-
ing, or pinching, or place any object
or weight on it.
Doing so may dam-
age the electrical
power cord, leading
to fire, electrical
shock, or electrocu-
tion.
When not in use for extended periods,
unplug the power-cord plug from the
electrical outlet.
Failure to do so may re-
sult in danger of electri-
cal shock, electrocution,
or fire due to deterioration
of electrical insulation.
When unplugging the electrical power
cord from the power outlet, grasp the
plug, not the cord.
Unplugging by pulling
the cord may dam-
age it, leading to fire,
electrical shock, or
electrocution.
Do not attempt to unplug the power-
cord plug with wet hands.
Doing so may result
in electrical shock
or electrocution.
Do not allow liquids, metal objects or
flammables inside the machine.
Such materials
can cause fire.
Install on a stable surface.
Failure to do so may
result in the unit tipping
over, leading to injury.
When you're finished, wash your
hands to rinse away all cuttings.
Perform dry cutting with no cutting oil.
Such materials can cause fire.