IBM EGX-600 Engraver User Manual


 
32
Chapter 2 - Basic Operation
2-6. Care and Handling of Memory Cards
Inserting and Removing a Memory Card
Inserting a Memory Card
1
Make sure the display shows the top screen.
2
Remove the slot cover.
3
Hold the card with the label side facing up and
the notch on the right, and insert it into the
memory-card slot. Press it in gently until it clicks
into place.
4
Attach the slot cover.
X 0 Y 40700
Z 0 8000RPM
Be careful to orient the memory card correctly when inserting it. An incorrectly inserted card will not function and may
even cause breakdown.
Before you insert a memory card, carefully clean away any cutting waste from the memory card and the area around the
memory-card slot.