Filter
Top Products
18
Chapter 1 - Getting Started
1-2. Names and Functions
Power switch
Power-cord connector
Serial connector
This connector is for
connection to the COM
port on the computer.
Parallel connector
This connector is for
connection to the printer
port on the computer.
Expansion connector 1
This connector is for transmitting the
rotation of the spindle to an external
device.
Expansion connector 2
This is for communication with an
external device using the teaching
feature.
Rear
Operation Panel
Dial
This adjusts the spindle rotating
speed. It is also used for menu
operations.
Display
Connector
Menu button
This displays the main menu.
ENTER/PAUSE button
This enables values you enter. Pressing it while
cutting is in progress pauses operation.
Spindle button
This starts and stops rotation of
the spindle.
X/Y-axis Origin Set button
This sets the reference point for the
cutting position.
Z-axis Origin Set button
This makes settings such as for the
reference point for aligning the
cutter.
Movement buttons
These move the spindle head forward
and backward and to the left and right.
They are also used for menu opera-
tions.
Z-axis Movement buttons
These move the spindle head up
and down.
Feed button
This is used in combination with
the movement buttons.
Copy button
This calls up the menu for the copy
feature.